The cause of the failure of the high and low temperature humidity and heat alternating test chamber

High and low temperature humidity and heat alternating test chamber in the process of doing the test will always have some small failures, resulting in test results can not meet expectations, so how should we effectively avoid these? We only understand what is the cause of its failure, in order to avoid in order to achieve the expected test results, the following by the small editor for everyone to briefly describe the reasons for the failure of the
high and low temperature humidity and heat alternating test chamber test.

1.
Move the equipment from the indoor with relatively high temperature to the outdoor
with relatively low temperature.

2.
When starting the motor, the temperature of its surrounding devices will continue to rise, but if the motor is turned off and the surrounding devices will have a temperature
drop.

3.
If the temperature rises too high, there will be solder reflow
.

4.
The high and low temperature humidity and heat alternating test box is connected to the power supply in a relatively low temperature environment, and a steep temperature gradient will appear inside the test chamber, and the power supply will be disconnected in a relatively low temperature environment, which may lead to a steep temperature gradient in the opposite direction inside the test chamber
.

5.
The equipment may also suddenly cool
due to natural climatic factors.

The above is the reason why the high and low temperature humidity and heat alternating test chamber test failed for everyone, I hope that the use of personnel in the process of testing, maintenance to pay attention to these, this sample in the use of the process can minimize the failure in case the later test results meet expectations, can effectively ensure that the equipment can operate
normally.

If customers are interested in this, they can go to Aipei Technology for consultation
.