The alcohol sedimentation tank is available in carbon steel or stainless steel for easy on-site manufacturing

Alcohol sedimentation tank steel plate alcohol fermentation tank is made of steel plate, the thickness of the steel plate varies depending on the volume of the fermentation tank, generally made of 4-8 mm thick steel plate, the tank body is cylindrical, the ratio of the diameter of the tank to the height is 1:1.
1; the cover and the bottom are conical to form a disc; the tank is equipped with a cooling snake tube, and the number of snake tubes is generally taken from no less than 0.
25 square meters of cooling area
per cubic meter of fermentation mash.
The snake tube can be installed in two groups and fixed
.
It is also used at the top of the tank to use a water pipe or a water enclosure plate to make the water flow down the wall of the tank to achieve the purpose
of cooling fermented mash.
For fermenters with large volumes, both cooling forms can be used at the
same time.
For alcohol factories located in the south, cooling measures should be strengthened due to high temperatures
.
Some factories set up a bubbler at the bottom of the fermentation tank in order to stir the mash solution and make the fermentation even
.
The top of the tank is equipped with a CO2 exhaust pipe, a heating steam pipe, and a mash input pipe
.
However, the pipeline setting should be simplified as much as possible to achieve multi-purpose use of one pipe, which plays an important role in
reducing pipeline dead angles and preventing bacterial pollution.
The top and side of the large fermentation tank should also be equipped with manholes for easy cleaning
.
The main features of the alcohol precipitation tank: 1.
The interlayer of the large tank is used as an evaporator, the liquid ammonia is directly evaporated in the jacket, and the beer liquid in the tank is cooled by its vaporization latent heat, thereby eliminating the intermediate heat exchange cycle of alcohol water and saving more than
12% of energy consumption.
2.
The jacket as an evaporator, because the pressure in the jacket is higher than that of the alcohol water system, for this reason, a safe and reliable, reasonable, novel structure of the honeycomb structure jacket is set up, the honeycomb structure composed of the jacket and the cylinder, the strength and stiffness of each other have been improved
.
Jacketed welds can be reduced by 30%.

3.
The jacket is made of sheet type, and the welding with the cylinder completely avoids the longitudinal and circular welds of the cylinder, avoiding the possibility of
ammonia leakage into the beer liquid in the tank through the weld.
Overcomes the shortcomings
of other jackets.
4.
Optional carbon steel or stainless steel material, easy to manufacture on site, reduce manufacturing costs, save investment costs
.
5.
Small footprint, and can avoid the use of alcohol water cooling system brought by the alcohol volatilization of the air pollution, in line with environmental protection product requirements
.
6.
The base of the equipment can be used in steel frame structure and concrete structure, which can be determined
according to the user when ordering.