TCU temperature control unit matching reactor installation details

The TCU temperature control unit is a temperature control system that integrates refrigeration and heating.
It is often combined with the reactor to provide the required cold and heat sources.
The fully closed circulation pipeline can automatically adjust heating or cooling according to process requirements
.

It is widely used in the pharmaceutical and chemical industry.
When the reactor needs high temperature and low temperature, the temperature can be quickly raised and lowered to reach the temperature required for the material reaction
.

▼How to cool the TCU temperature control unit of the reactor? The heat transfer medium of the temperature control system of the reactor is a coolant, which transports the heat generated by other instruments or equipment that needs to be cooled, and sends the heat to the outside of the equipment through the refrigeration system to ensure that the equipment works within the normal temperature range
.

The closed medium circulation is formed between the device and the instrument by the pressure of the pump in the device, and the temperature of the medium is detected by the temperature sensor to realize the control of the cooler
.

The temperature control system of the reaction kettle is semi-closed in circulation.
There is no oil mist volatilization at high temperature, the heat transfer oil will not be oxidized and browned, and the water vapor in the air will not be absorbed at low temperature, which prolongs the life of the heat transfer oil
.

▼Reaction kettle TCU temperature control unit installation instructions: The reaction kettle temperature control system should be installed in a laboratory with a good environment; the reaction kettle temperature control system should be installed on a well-ventilated, dust-free stable floor or laboratory table to avoid droplets, Where there is a lot of steam and where inflow, stagnation and leakage may occur, avoid places close to high-frequency equipment (high-frequency welding machines, etc.
); the temperature control system of the reactor should avoid frequent use of acidic solutions and frequent use of special sprayers (including In the case of objects, etc.
), from the convenience and safety aspects of maintenance and installation, try to ensure that there is enough space between the indoor unit and obstacles
.

In order to facilitate the maintenance and maintenance of the temperature control system of the reaction kettle, do not damage the unit; the unit should be placed horizontally and installed in a ventilated position to prevent friction and overheating from damaging the machine; the temperature control system of the reaction kettle is simple to install, easy to operate, and does not require professional operation.
It can be operated by simply training the operator, or by reading the manual; ▼Set before starting the TCU temperature control system of the reactor: when connecting to the power supply, press the power button of the temperature control system of the reactor, and press the stop button when the power is turned on.
; Please adjust the temperature of the temperature control meter to the desired temperature before running; the panel indicator light on the fault panel is on and the reaction kettle temperature control system will stop working automatically according to the panel indicator light during the operation process; The accessories must be made of materials that can withstand high temperature.
According to the control temperature of the model, the specific materials will be different, such as Teflon pipes, corrugated pipes, etc.
, the oil pipe connection is locked, and check it again after starting the machine to avoid loosening.
▼Set before shutting down the TCU temperature control system of the reactor: when the temperature control system of the reactor is shut down, you should press the stop button first; press the power to turn off the electric box and turn it off; use the parameters of the temperature control table; the temperature control system of the reactor When shutting down, wait for the temperature to drop before shutting down
.

 　　The reactor TCU temperature control system is used in various industries
.

When choosing, it needs to be based on the size, weight, species and volume of the jacket or coil, the specific heat and viscosity of the material in the reactor, and the density are also closely related
.

The temperature required to realize the reactor temperature control system is also related to the temperature requirements of the equipment model, so the reactor temperature control system suitable for the model is selected to achieve the required temperature range in the experiment
.

 　　When choosing a reactor temperature control system, it is necessary to calculate the size of its jacket or coil to estimate the time required for temperature control, and the user can customize whether explosion or isolation is necessary
.

 　　Reactor temperature control system for different media: The different media for the temperature of the reactor temperature control system are divided into oil-cooled reactor temperature control systems, different temperatures and different media, water at normal temperature, heat transfer oil at high temperature, and refrigeration at low temperature.
agent
.

 　　The temperature control system of the TCU reactor can accurately control the temperature range within ±0.
5°C, and can rapidly heat up and cool down
.

Provide constant temperature experimental field source for petrochemical, biopharmaceutical, food and other industry applications
.

The temperature control within the full range, the cooling capacity is large, the cooling speed is fast, and the energy consumption is low, which greatly improves the work efficiency
.