-
Categories
-
Pharmaceutical Intermediates
-
Active Pharmaceutical Ingredients
-
Food Additives
- Industrial Coatings
- Agrochemicals
- Dyes and Pigments
- Surfactant
- Flavors and Fragrances
- Chemical Reagents
- Catalyst and Auxiliary
- Natural Products
- Inorganic Chemistry
-
Organic Chemistry
-
Biochemical Engineering
- Analytical Chemistry
-
Cosmetic Ingredient
- Water Treatment Chemical
-
Pharmaceutical Intermediates
Promotion
ECHEMI Mall
Wholesale
Weekly Price
Exhibition
News
-
Trade Service
Continuous operation of the shaker incubator: 1.
Turn on the power button of the full-temperature shaker incubator, that is, the POWER button points to ON
.
2.
If the shaker incubator needs to be illuminated, please press the illumination key (INTERIORLIGHTS), and the LED display (LEDDISPLAY) will flash
.
3.
Press the mode select key (SELECTKEY) until the revolutions per minute function indicator (RPM) lights up
.
At this time, the LED display (LEDDISPLAY) will appear OFF
.
Note: Press the △ key (up key) or ▽ key (down key) for more than 5 seconds to change the speed, time or temperature settings
.
4.
Use the △ key (up key) or ▽ key (down key) to set the revolutions per minute (RPM) value of the full-temperature shaking incubator
.
Note: The maximum speed is 400rpm
.
For multi-layer units, the maximum speed is 300rpm
.
5.
When using the △ key (up key) or ▽ key (down key), the setting (SET) light on the left side of the LED display (LEDDISPLAY) will light up, and you can enter the setting mode (SETMODE) of a specific function.
)
.
Note for shaker incubators: If you want to change the set value during operation, follow the steps below: (1) Press the START/STOPKEY
.
(2) Press the mode selection key (SELECTKEY) until the revolutions per minute function indicator (RPM) of the full temperature incubator is illuminated
.
(3) Use the △ key (up key) or ▽ key (down key) to set the revolutions per minute (RPM) value of the full-temperature shaking incubator
.
Note: During the process of changing the speed, the warning light will flash until the speed returns to within 5rpm of the set value
.
Turn on the power button of the full-temperature shaker incubator, that is, the POWER button points to ON
.
2.
If the shaker incubator needs to be illuminated, please press the illumination key (INTERIORLIGHTS), and the LED display (LEDDISPLAY) will flash
.
3.
Press the mode select key (SELECTKEY) until the revolutions per minute function indicator (RPM) lights up
.
At this time, the LED display (LEDDISPLAY) will appear OFF
.
Note: Press the △ key (up key) or ▽ key (down key) for more than 5 seconds to change the speed, time or temperature settings
.
4.
Use the △ key (up key) or ▽ key (down key) to set the revolutions per minute (RPM) value of the full-temperature shaking incubator
.
Note: The maximum speed is 400rpm
.
For multi-layer units, the maximum speed is 300rpm
.
5.
When using the △ key (up key) or ▽ key (down key), the setting (SET) light on the left side of the LED display (LEDDISPLAY) will light up, and you can enter the setting mode (SETMODE) of a specific function.
)
.
Note for shaker incubators: If you want to change the set value during operation, follow the steps below: (1) Press the START/STOPKEY
.
(2) Press the mode selection key (SELECTKEY) until the revolutions per minute function indicator (RPM) of the full temperature incubator is illuminated
.
(3) Use the △ key (up key) or ▽ key (down key) to set the revolutions per minute (RPM) value of the full-temperature shaking incubator
.
Note: During the process of changing the speed, the warning light will flash until the speed returns to within 5rpm of the set value
.
