-
Categories
-
Pharmaceutical Intermediates
-
Active Pharmaceutical Ingredients
-
Food Additives
- Industrial Coatings
- Agrochemicals
- Dyes and Pigments
- Surfactant
- Flavors and Fragrances
- Chemical Reagents
- Catalyst and Auxiliary
- Natural Products
- Inorganic Chemistry
-
Organic Chemistry
-
Biochemical Engineering
- Analytical Chemistry
-
Cosmetic Ingredient
- Water Treatment Chemical
-
Pharmaceutical Intermediates
Promotion
ECHEMI Mall
Wholesale
Weekly Price
Exhibition
News
-
Trade Service
The constant temperature shaking incubator can be widely used in bacterial culture, fermentation, hybridization and biochemical reactions, as well as enzyme, cell tissue research and other application fields that have high requirements on temperature and oscillation frequency
.
When customers buy equipment, the service life is a very concerned issue, so how to effectively extend the service life of the constant temperature shaking incubator? In addition to the quality of the product itself, the later operation and maintenance are very important
.
Specific matters to effectively prolong the service life of the shaking incubator: 1.
After the constant temperature shaking incubator is on the ground, if the ground is uneven, it should be leveled
.
The equipment should be moved in parallel, and the inclination angle in any direction should be less than 45 degrees
.
2.
When the constant temperature shaking incubator is in normal operation, the placement of the loads in the box should not affect the air circulation to ensure that the temperature in the box is uniform
.
The inner tank of the box wall and the surface of the equipment should be wiped frequently to keep it clean
.
3.
During the continuous operation of the instrument, a regular inspection should be done every three months; check the fuse, control components and fastening screws, and whether there are water droplets, dirt, etc.
falling on the motor and control components
.
4.
The instrument is used regularly, and natural wear and tear is a normal phenomenon
.
After the instrument has been used for one year, if it is found that the motor and compressor have abnormal noise; the bearing of the transmission part is worn, the belt is loose or cracked, the electronic control element fails, etc.
, the company will continue to provide services and assist in handling
.
5.
The compressor of the constant temperature shaking incubator should avoid continuous starting
.
6.
If the equipment is not used for a long time, the power cord should be unplugged to prevent the equipment from being charged and hurting people, and it should be run for 2-3 days according to the conditions of use on a regular basis (usually a quarter) to drive off the moisture of the electrical components and avoid damage to the relevant devices
.
7.
The bearings of the transmission part have been filled with an appropriate amount of grease before leaving the factory.
During the continuous operation of the instrument, grease should be filled every six months, and the filling amount accounts for about 1/3 of the bearing space
.
.
When customers buy equipment, the service life is a very concerned issue, so how to effectively extend the service life of the constant temperature shaking incubator? In addition to the quality of the product itself, the later operation and maintenance are very important
.
Specific matters to effectively prolong the service life of the shaking incubator: 1.
After the constant temperature shaking incubator is on the ground, if the ground is uneven, it should be leveled
.
The equipment should be moved in parallel, and the inclination angle in any direction should be less than 45 degrees
.
2.
When the constant temperature shaking incubator is in normal operation, the placement of the loads in the box should not affect the air circulation to ensure that the temperature in the box is uniform
.
The inner tank of the box wall and the surface of the equipment should be wiped frequently to keep it clean
.
3.
During the continuous operation of the instrument, a regular inspection should be done every three months; check the fuse, control components and fastening screws, and whether there are water droplets, dirt, etc.
falling on the motor and control components
.
4.
The instrument is used regularly, and natural wear and tear is a normal phenomenon
.
After the instrument has been used for one year, if it is found that the motor and compressor have abnormal noise; the bearing of the transmission part is worn, the belt is loose or cracked, the electronic control element fails, etc.
, the company will continue to provide services and assist in handling
.
5.
The compressor of the constant temperature shaking incubator should avoid continuous starting
.
6.
If the equipment is not used for a long time, the power cord should be unplugged to prevent the equipment from being charged and hurting people, and it should be run for 2-3 days according to the conditions of use on a regular basis (usually a quarter) to drive off the moisture of the electrical components and avoid damage to the relevant devices
.
7.
The bearings of the transmission part have been filled with an appropriate amount of grease before leaving the factory.
During the continuous operation of the instrument, grease should be filled every six months, and the filling amount accounts for about 1/3 of the bearing space
.
