Precautions for Fusion Meters

The melting instrument is an instrument used to check the melting, softening or dissolving state of solid preparations such as suppositories or vaginal tablets under regular conditions
.

The melting instrument is composed of a water bath, a water bath heater and its temperature control system, a water bath circulation system and a net blue for placing the test agent, a frame plate for fixing and turning the net blue, a bracket, a turning hand wheel and a transmission mechanism.
It is composed of a stirring system, etc.
The characteristics of the melting instrument are that the water bath circulation system is an extracorporeal circulation system placed outside the water bath, and the transmission mechanism of the turning net blue is composed of a driving wheel and a passive wheel driven by nylon threads.
Line wheel drive mechanism
.

The melting instrument detects the decay value of the suppository, and adopts the design of micro-mechanical integration.
The microcomputer realizes the temperature measurement of the water bath, the timing alarm and the metal frame turning control
.

The work is reliable, the operation is simple, and the performance is excellent, and its technical indicators fully comply with the provisions of the "Chinese Pharmacopoeia"
.

After the measurement medium is heated to 36-37C, put the suppository on the sample holder, then on the drum, turn it over every 10 minutes with the black handle, and repeatedly test more than 2 suppositories, all samples should disintegrate within the standard time Done
.

The device is also suitable for examination of vaginal films
.

At this time, only use the sample holder, put it into a glass container, adjust the liquid level of the 37C medium, just cover the upper plate, take the tablets and place them on the upper plate, then cover them with a suitable glass plate to maintain appropriate humidity conditions, 2 The above pills
.

Notes on the fusion instrument: 1.
After turning on the power, there is no display, check whether the 220V power supply, the fuse (10A? ) and the power socket are in good contact
.

　　2.
When the temperature of the water bath is less than 30, only "30" is displayed on the temperature window
.

_ "represents the actual temperature when it reaches 30; do not turn on the power supply when the water tank is not filled with water
.
The
water pump is easily damaged
.

　　3.
When the water circulation system is not working normally, it is strictly forbidden to press the "temperature control key" to heat
.

There is a danger of burning the heating tube
.

　　4.
Since it is not applicable for a long time, please drain the water in the tank
.

　　5.
It cannot be lifted and lowered on the water bath
.

Hold it gently with both hands and place it gently to prevent it from falling, so as not to damage your fingers
.

　　6.
After each test, clean the metal frame and transparent sleeve, and replace the medium (water)
.