Placement Conditions for Small Heating Circulators

The small heating cycle device has heating and cooling functions, and is widely used in colleges and universities, environmental protection, biochemical, medical, chemical, scientific research and other fields
.

The heat transfer medium of the circulation system is a fully closed circulation.
The circulation system has a liquid expansion container.
The expansion container and the liquid circulation are independent systems.
The expansion container does not participate in the liquid circulation, but is only a mechanical connection
.

The same equipment, the same thermal medium can achieve continuous temperature control
.


There are certain differences in the size and performance of small heating cycle devices from different manufacturers.
Users need to pay attention to how to place them when placing them after purchase.
If they are not placed as required, it is not conducive to the operation of small heating cycle devices
.

The heat dissipation efficiency and easy inspection and maintenance should be considered when installing the small heating circulation device.
The floor on which the equipment is placed must be kept flat and has sufficient strength (, choose a location with less dust and vibration effects
.

　　Install the small heating in a dry room.
The equipment should be installed in a place where there is little dust if there is a circulation device, and there is a power supply and a sewer nearby
.
The
wind conditions make it possible that even if the refrigerant leaks from the equipment, there will be no lack of oxygen
.

　　The installation should be kept around Good ventilation
.
The
equipment will generate heat during operation.
If it is an air-cooled thermal shock, it will directly emit heat through the condensing air.
In the case of a small room and poor ventilation, the indoor temperature will rise rapidly, resulting in The machine stops running and alarms
.

Keep away from flammable or explosive substances or other substances that may generate high heat
.

　　When placing it, you need to be careful not to let the sun shine directly on the device.
When the use of the device exceeds this range, it is safe to The appliance will start, or the device will stop functioning
.

In order to obtain stable performance of the small heating cycle device, the installation room should be air-conditioned to keep it operating at a normal room temperature
.