Maoming Petrochemical implements "QR code" equipment integrity management

China Petrochemical News Network reported on October 9, Maoming Petrochemical’s instrument control and metrology department's refining instrument operation area east large team member Ning Zijie used an explosion-proof mobile phone to scan the two-dimensional information plate on a regulating valve on the spot during the inspection.
Code, detailed information of the regulating valve, such as valve body manufacturer, model, name, position number, pressure, medium, material, accessories, instrument duct diameter, wall thickness, previous failure phenomena and treatment methods, etc.
, appear on the mobile phone at a glance On
.

In petrochemical companies, small accessories such as valve, instrument, air pipe, wind meter, etc.
look a little inconspicuous, but the small accessories are often connected to the main line or main equipment, plus the "petite" and thin wall of the small "gadget" itself.
Characteristics, relatively weak in terms of earthquake resistance and corrosion resistance, prone to corrosion perforation, deformation, cracking, loosening, etc.
, especially the pipe section where the small instrument air pipe and the main line or the main equipment are connected to the first valve, if there is leakage or Looseness will affect the operation of main equipment and main lines, and even affect the operation of upstream and downstream devices or complete sets of devices
.

In order to strengthen the daily maintenance and overhaul of the instruments of the production equipment and ensure the safety and reliability of the instruments, the Instrument Control and Measurement Department revised and improved the instrument maintenance and overhaul strategies
.

According to the requirements of the instrument and equipment maintenance and repair strategy, the instrument control and measurement department has established and improved the instrument and equipment account in the ERP.
According to statistics, there are currently 240,000 sets of instruments and equipment in the register
.

In addition, the instrument control and measurement department imported the instrument and equipment management account into the equipment integrity management information system, automatically generated a two-dimensional code, and made a two-dimensional code information board, which was pasted on the body of each instrument
.

　　With the "ID card" of the instrument's two-dimensional code information plate, you can clearly understand the maintenance and repair strategy of each instrument as long as you scan the two-dimensional code on the spot
.

　　(Liang Yanping)