-
Categories
-
Pharmaceutical Intermediates
-
Active Pharmaceutical Ingredients
-
Food Additives
- Industrial Coatings
- Agrochemicals
- Dyes and Pigments
- Surfactant
- Flavors and Fragrances
- Chemical Reagents
- Catalyst and Auxiliary
- Natural Products
- Inorganic Chemistry
-
Organic Chemistry
-
Biochemical Engineering
- Analytical Chemistry
-
Cosmetic Ingredient
- Water Treatment Chemical
-
Pharmaceutical Intermediates
Promotion
ECHEMI Mall
Wholesale
Weekly Price
Exhibition
News
-
Trade Service
Horizontal ribbon mixer is widely used in chemicals, battery raw materials, coatings, dyes, pesticides, pharmaceuticals, food, feed, additives, refractory materials, new materials, electronic plastics, ceramics, fertilizers, metallurgy, mining, dry mortar, special building materials Mixing of powder and solid, powder and liquid in various industries
.
The maintenance instructions of the horizontal ribbon mixer are as follows: 1.
The reducer and bearings should be replaced with lubricating oil regularly during use.
The lubrication of the reducer should be carried out according to the requirements of the reducer manual
.
Lithium complex grease for spindle bearings; 2.
The particle size of the mixed material is 20-1400 mesh; the amount of liquid spray can be determined according to the adsorption performance of the material and the user's production process requirements; 3.
The mixing time of a material is generally about 5-8 The mixing time of special materials needs to be determined by the user's test; 4.
When the horizontal ribbon mixer equipment is running, no hard foreign matter larger than 5mm should enter the machine, otherwise it should be stopped and eliminated
.
If abnormal noises such as metal impact and friction are found during operation, it should be stopped in time to check and eliminate; 5.
When mixing solid-liquid, it should be operated first, and then sprayed.
After spraying, continue to operate and mix for 3 to 5 minutes.
Yes; 6.
The shaft end is sealed with packing, and the sealing material is generally oil-impregnated asbestos.
If a small amount of leakage is found during use, the packing bolts should be tightened
.
.
The maintenance instructions of the horizontal ribbon mixer are as follows: 1.
The reducer and bearings should be replaced with lubricating oil regularly during use.
The lubrication of the reducer should be carried out according to the requirements of the reducer manual
.
Lithium complex grease for spindle bearings; 2.
The particle size of the mixed material is 20-1400 mesh; the amount of liquid spray can be determined according to the adsorption performance of the material and the user's production process requirements; 3.
The mixing time of a material is generally about 5-8 The mixing time of special materials needs to be determined by the user's test; 4.
When the horizontal ribbon mixer equipment is running, no hard foreign matter larger than 5mm should enter the machine, otherwise it should be stopped and eliminated
.
If abnormal noises such as metal impact and friction are found during operation, it should be stopped in time to check and eliminate; 5.
When mixing solid-liquid, it should be operated first, and then sprayed.
After spraying, continue to operate and mix for 3 to 5 minutes.
Yes; 6.
The shaft end is sealed with packing, and the sealing material is generally oil-impregnated asbestos.
If a small amount of leakage is found during use, the packing bolts should be tightened
.
