-
Categories
-
Pharmaceutical Intermediates
-
Active Pharmaceutical Ingredients
-
Food Additives
- Industrial Coatings
- Agrochemicals
- Dyes and Pigments
- Surfactant
- Flavors and Fragrances
- Chemical Reagents
- Catalyst and Auxiliary
- Natural Products
- Inorganic Chemistry
-
Organic Chemistry
-
Biochemical Engineering
- Analytical Chemistry
-
Cosmetic Ingredient
- Water Treatment Chemical
-
Pharmaceutical Intermediates
Promotion
ECHEMI Mall
Wholesale
Weekly Price
Exhibition
News
-
Trade Service
First, maintenance: 1.
The inside and outside of the sink should often be kept tidy, and the shell spray should not be rubbed with a reactive chemical solution to avoid chemical reactions
.
2.
If the instrument is not used, the water in the studio tank should be removed, wiped off with a soft cloth and dried
.
Put the plastic film dust cover in the drying room to avoid the use
of the temperature control instrument from moisture.
3.
The instrument should not be used in high voltage, high current, strong magnetic field, with corrosive gas environment, so as to avoid instrument interference damage and electric shock hazard
.
4.
It is forbidden to use the heater
in the anhydrous state of the sink.
Second, precautions: 1.
The sink shell must be grounded to ensure use
.
2.
Do not press the power switch before adding water to prevent burning of the electric heating pipe and pump
.
3.
When the sink has an audible and light alarm, please check whether the set temperature deviates from the normal range, 4.
If it does not deviate, it should be stopped, please check the maintenance personnel or hand it over to the factory for repair
.
5.
Do not disassemble the side panel
of the temperature control device.
6.
If there is an abnormal imagination in use, please cut off the power supply and obtain it with our company in time!
