Jiangsu Province Issues Draft for Solicitation of Comments on Management Measures for Automatic Monitoring of Pollution Sources

[ Policies and Regulations of Chemical Machinery Equipment Network ] Strengthen pollution source supervision, standardize the construction and operation management of pollution source automatic monitoring system, and give full play to the effectiveness of pollution source automatic monitoring system.
According to relevant laws, regulations, and rules, Jiangsu Province has formulated the Jiangsu Province pollution source automatic monitoring and management measures (solicited Opinion draft).

 

Automatic monitoring of key pollution sources is an important measure to control the concentration and total amount of pollutants.
It is the basis and technical support for environmental management by the competent department of ecological environment.
Automatic monitoring is also a feasible method for real-time and dynamic monitoring of pollution emissions, and its importance is self-evident.
Metaphor.
These Measures are applicable to the construction, operation, maintenance, management and on-site supervision and inspection of the automatic monitoring system for pollution sources in the administrative area of ​​this province.

 

The pollution source automatic monitoring system referred to in these Measures is composed of pollution source automatic monitoring equipment, monitoring platform and data transmission network.
Including automatic monitoring equipment installed at the pollution source site , flow (speed) meter, video monitoring equipment, automatic sampling equipment, power consumption monitoring equipment and other equipment used to monitor and monitor pollutant discharge and the working conditions of pollution control facilities for data collection , Transmission data acquisition instruments and other instruments and meters are an integral part of pollution prevention facilities.

 

The automatic monitoring system is composed of the automatic monitoring equipment of the sewage disposal unit and the monitoring equipment of the ecological environment department.
Automatic monitoring equipment is installed at the site of fixed pollution sources, including instruments for monitoring and monitoring pollutant discharge, flow (speed) meters, pollution control facility operation recorders, sampling devices, data collection and transmission instruments, meters, sensors and other facilities, automatic monitoring Equipment and supporting facilities are an integral part of pollution prevention facilities.

 

　　Its sampling and transmission requires automatic monitoring equipment such as exhaust gas pollution source, waste water pollution source flow (speed) meter, pH and other automatic monitoring instruments to transmit automatic pollution source monitoring data in real time at least every 10 minutes.
Automatic monitoring instruments such as wastewater COD, ammonia nitrogen, total phosphorus, total nitrogen, etc.
should be mixed and sampled through an automatic sampler.
The pollutant discharge unit is responsible for the authenticity, completeness and validity of the automatic monitoring and monitoring data of the pollution source.
The original data shall be kept for at least 5 years, the data on working conditions, treatment facilities and other data shall be kept for at least 1 year, and the ledger data shall be kept for at least 3 years.
.

 

　　The pollution source automatic monitoring equipment and its supporting facilities must meet the following requirements: the relevant instruments in the pollution source automatic monitoring equipment shall be given priority to select the products that have passed the applicability test of the environmental monitoring instrument testing agency recognized by the *; the relevant equipment in the pollution source automatic monitoring equipment The information such as the model and operating parameters of the pollution source must be recorded in the provincial pollution source automatic monitoring platform.
The instrument and equipment manufacturer is responsible for the authenticity, completeness and timeliness of the recorded information; data collection and transmission comply with the national pollution source automatic monitoring system data transmission and interface standards Technical specifications, in the CEMS automatic monitoring facility for exhaust gas pollution sources, the analyzer data is not allowed to be processed by an industrial computer and then sent to the data acquisition instrument.
It must be directly connected to the data acquisition instrument and transmitted to the monitoring platform of the environmental protection department; the automatic pollution source monitoring equipment should be installed in Sewage outlets that meet the requirements of the ecological environment; in accordance with the relevant national environmental monitoring technical specifications, the comparison and acceptance monitoring of environmental monitoring instruments should be qualified; the automatic pollution source monitoring equipment and the pollution source monitoring center of the environmental protection departments at all levels can be stably connected to the network.

 

　　In addition, during the shutdown or failure of the automatic monitoring facility, the pollutant discharge unit or its entrusted operating unit shall adopt manual monitoring methods to monitor the pollutant discharge status, and report the monitoring data to the competent ecological environment authority with jurisdiction within 72 hours , Waste water monitoring is not less than 4 times a day, and the interval shall not exceed 6 hours; waste gas monitoring is not less than 1 time a day.

 

　　Original Title: Jiangsu Province Issued Draft for Soliciting Comments on Management Measures for Automatic Monitoring of Pollution Sources