Introduction to the test instrument on the stripping torsional stranding performance of the enameled wire

QB-80 enameled wire stripping twist tester is mainly used to detect the adhesion performance
of enameled round wire enamel film.

It is used to detect the adhesion performance
of the enameled round wire with a conductor diameter greater than 1.
0mm.

Dragged by an AC low-speed synchronous motor, driven by cylindrical gears, the rotary chuck clamps the specimen and rotates at a constant speed; Since another sliding chuck clamps the specimen and cannot rotate, the specimen is twisted, and when the number of twists reaches the preset number, the instrument automatically stops the twist
.

Single-chip microcomputer control
.

Arbitrarily set the number of twists and twists; The LED automatically displays the number of
twisting turns.

The torsion counter count is accurate and reliable; the use of high-strength steel scraping knife, easy to
operate and use.

Implementation standard: GB/T4074.
3-2008/IEC60851-3:1997; · Inspection standard: JB/T4279.
6-2008; · Meet the requirements
of GB/T6109-2008 standard.

Technical parameters: detection range 1.
0 ~ 3.
0mm twisting speed 80r / min distance between the two fixtures (test length) (500±2) mm torsional counting range 0-999r torsional counting preset 0-999r input power ac220V±10%, 50HZ power consumption< 150W working ambient temperature: 0-40 °C; Relative humidity: ≤85% dimensions 1235 * 200 * 260 (L * B * H) weight of 40kg weight equipped with: ·5N×1, 15N×2, 20N×3, 55N×1, hook + hook holder 5N; Optional accessories: ·55N weight, 100N weight, hook + hook holder (10N).
<b114>
Label: enameled wire stripping twist tester