Introduction to the initial tack performance measurement instrument of adhesive products

Constant temperature initial viscosity testing machine Model: CNY-1H serial number Technical parameters 1 Equipment use: for self-adhesive, rubber, plastic, textile, waterproof materials, non-woven fabrics and other non-metallic materials and wires, metal foils, metal sheets of tensile, peeling, tearing, compression and other mechanical properties test
.

22.
1 According to the test requirements with the corresponding tooling fixture, can do the initial viscosity, tensile, peeling and other tests; A set of standard tensile fixtures (according to user specimen requirements) 2.
2 large load: 1KN; load accuracy: within 1% of the ± of the indicated value; Sampling frequency: 1KHz; 2.
3 Effective stretch space: 300mm; Effective test width: test column distance sensor center distance is 60mm; 2.
4±1% 2.
50-500mm/min stepless speed regulation 2.
6 motor: servo motor-drive; 2.
7 has the functions
of automatic load holding, stress strain control and sample protection, and overload protection.

2.
8 The size of the whole machine occupies a small area and is easy to operate; 2.
9 Software: Enter the parameters of the specimen, the software can automatically complete the experiment according to the standard; Test data analysis can be carried out to obtain the mechanical property index of the sample; 33.
1 Adapt to different types of hot melt adhesive constant temperature test requirements of the fixture, at least 2 sets; 3.
2 Computer for analysis and control, 1 unit; 3.
3 Configure a set of incubators, which can match the initial adhesion of hot melt adhesives in the high temperature environment (50 °C-150 °C) of
the equipment.

44.
1 The technical personnel authorized by the instrument manufacturer are installed and commissioned on site, and the experience of the instrument technical indicators is qualified, with an acceptance report; 4.
2 The instrument manufacturing plant has experienced maintenance engineers and technical application support engineers in charge in China; 4.
3 The warranty is free of charge for two years
from the date of installation and commissioning of the instrument.

After the warranty period, the long-term supply of spare parts and normal after-sales service
should be guaranteed.

5 training requirements: during the installation and acceptance period, the user is in the user's location for the basic operation and daily maintenance of the instrument on-site training, including the instrument principle, use methods and maintenance methods
.

6 verification requirements: the equipment must be a new unused, original and complete supporting qualified products
.

77.
1 (if necessary) provide the verification (calibration) certificate
issued by a third-party institution with verification qualifications as standard by Party A.

7.
2 Provide a complete set of product instructions, operating instructions and spare parts manuals when delivering, if the bidder is an imported equipment, the "People's Republic of China Customs Import Goods Declaration Form" and "Certificate of Origin"
must be provided at the same time.

Tags:Constant temperature initial viscosity testing machine