-
Categories
-
Pharmaceutical Intermediates
-
Active Pharmaceutical Ingredients
-
Food Additives
- Industrial Coatings
- Agrochemicals
- Dyes and Pigments
- Surfactant
- Flavors and Fragrances
- Chemical Reagents
- Catalyst and Auxiliary
- Natural Products
- Inorganic Chemistry
-
Organic Chemistry
-
Biochemical Engineering
- Analytical Chemistry
-
Cosmetic Ingredient
- Water Treatment Chemical
-
Pharmaceutical Intermediates
Promotion
ECHEMI Mall
Wholesale
Weekly Price
Exhibition
News
-
Trade Service
Formulation characteristics
The multi-element titanium dioxide additive AY-726W used in this product has high hiding power, low oil absorption, and good chemical stability, which greatly improves the performance of the latex paint, and the wet rubbing performance is increased from 500 to 800.
The contrast ratio is changed from 0.
Application field
This product is mainly used in interior wall coatings.
Recipe details
Production Method
Put deionized water and half of the additives into the dispersion tank, turn on the stirring device, control the speed to 600r/min, stir it evenly, and then put the multi-element titanium dioxide additives, pigments, fillers and base materials into the dispersion tank;
Control the rotation speed of the stirring device to 1200r/min, disperse at high speed for 15min, and then sand filter to control the sample fineness to be less than 50μm, and finally add the remaining additives for paint mixing, stir evenly and control the viscosity to pass, then the product will be obtained.
Precautions
The proportions of the components of this product are in the range of 18-22 base materials, 1.
The base material includes styrene-acrylic emulsion; the multi-element titanium dioxide additive is a commercially available titanium dioxide additive AY-726W; the filler is heavy calcium carbonate; the additive is a defoamer; the defoamer includes silicone oil and higher alcohol Or Span emulsifier.
