Installation and commissioning of walk-in constant temperature and humidity test chamber

The walk-in constant temperature and humidity test chamber is a very important large-scale test equipment relative to many industries, and usually can detect the performance
of the product with the fastest speed.

However, these are to ensure that the walk-in constant temperature and humidity laboratory installation and commissioning is correct in the case of play, so Liuqin Technology to talk about what need to be paid attention to when installing the walk-in constant temperature and humidity laboratory? 1.
First of all, the walk-in constant temperature and humidity test room must be spaced more than 50cm apart from the surrounding walls or equipment, so as to facilitate subsequent maintenance
.

2, in order to ensure that the use of the process can be stable to play the function and performance of the equipment, we should install the equipment in the perennial temperature of 15 ~ 25 °C, relative humidity less than 85% of the place, if the installation site does not have this condition, then you can install air conditioning or exhaust fan to achieve the purpose
.

3, can not be installed in the test equipment with high temperature heating source place, it is best to near the temperature should not have a sharp temperature change
.

4.
Before installing the walk-in constant temperature and humidity test room, we must use the spirit level to determine whether the ground is level
.

5.
Ensure that the trial equipment is installed in a place
without direct sunlight.

6.
Before installation, it is necessary to determine whether the ventilation of the place is good
.

7.
Can be installed in a place
close to the power supply.

Whenever possible, install the walk-in thermostatic test chamber close to the power supply
.

The installation of the walk-in constant temperature and humidity laboratory is a very important step, if the equipment is not installed, it will cause serious trouble
to the subsequent test.