Inhalation Preparation Drug Tester Impactor with Pre-Separator MOC Nozzle Shanghai Litao

Inhalation preparation drug tester impactor with pre-separator MOC nozzle Shanghai Litao 1.
The flow rate is adjustable from 15L/min to 100L/min; 2.
Contains 7 layers of impactor and a micro-hole collector; 3.
With 8 movable collection cups; 4.
The impactor contains a pre-separator, which can be used to detect inhaled aerosols, inhaled sprays, inhaled powder aerosols and inhaled liquid preparations
.

5.
The pre-separator can effectively remove 10-15μm large particles generated by the dry powder inhaler; 6.
The collection cup is the impact surface, placed on the tray, directly below the nozzle; 7.
The dose uniformity test
of inhaled powder aerosol, inhaled aerosol and inhaled spray can be completed.

8.
The artificial throat is made of stainless steel, and the size meets the requirements
of the YAO code.

9.
The pre-separator is made of stainless steel, with a hole diameter of 12.
80±0.
05mm, which meets the requirements of
YAO Codex.

10.
First-class nozzle, aperture 14.
30±0.
05mm, in line with YAO code requirements
.

11.
Secondary nozzle, bore diameter 4.
88±0.
04mm, in line with YAO code requirements
.

12.
Three-stage nozzle, aperture 2.
185±0.
02mm, in line with YAO code requirements
.

13.
Four-stage nozzle, aperture 1.
207±0.
01mm, in line with YAO code requirements
.

14.
Five-stage nozzle, pore diameter 0.
608±0.
01mm, in line with YAO code requirements
.

15.
Six-stage nozzle, bore diameter 0.
323±0.
01mm, in line with YAO code requirements
.

16.
Seven-stage nozzle, bore diameter 0.
206±0.
01mm, in line with YAO requirements
.

17.
MOC nozzle, pore diameter of about 0.
07mm, in line with YAO code requirements
.