How to properly clean and manage clean clothes

Clean clothing is suitable for electronics, optical instruments, pharmaceutical, microbial engineering, precision instruments and other industries with dust-free and antistatic properties of special workwear, the lining is generally embedded conductive wire synthetic fiber fabric
.

The most important part of the management of clean clothing is cleaning, although the fiber itself is a clean fiber that is difficult to stain, but how to maintain it is an important factor, that is, the method of
cleaning.

If the ordinary washing method is used, of course, it will be stained
on the contrary.

So a special method
must be used.

Cleanliness is subject to management considerations, and cleaning and packaging
must also be carried out in the clean room when cleaning.

Usually clean overalls are washed at least once a week, and some demanding jobs are even washed once a
day.

After understanding how to clean clothes, now let's understand how some clean clothes are managed to improve the efficiency and quality assurance of use
.

The key points of management attention are as follows: 1.
- The general production area, control area and clean area of the work clothes should be clearly distinguished in terms of style and color, and must not be mixed
.

2.
Washing and disinfection of clean room work clothes (1) General production area work clothes are washed 1 to 2 times a week, and work clothes in the control area and clean area must be washed and disinfected
every shift.

(2) At the end of the work, the staff of the control area and the clean area should change their work clothes in time and put them into the window to be washed and disinfected
by special personnel.

Do not take out the control area or the wash area
.

(3) The washing and drying of overalls should be carried out in a clean room to avoid dust and insect pollution
.

Workwear with different cleanliness requirements should be washed
separately.

The sterile clothing in the clean area and control area is washed and dried, and then the pieces are packaged into sterilization bags and sterilized
centrally.

After sterilization, make a status mark and indicate the date of sterilization, and use
the work clothes after sterilization within 2 days.

(4) The workwear cabinet should be divided into workwear cabinets to be replaced and workwear cabinets to be replaced, and there are obvious signs, and must not be mixed to prevent cross-contamination
.