How to distinguish the switch of the fusion meter?

The melting instrument is an instrument used to check the melting, softening or dissolving of solid preparations such as suppositories or vaginal tablets under specified conditions
.

How to distinguish the switch of the fusion meter? Press the speed start/stop button under the speed display window of the fusion instrument once, the operating status indicator above it will be on, the rotating rod will start to roll, and the display window will display the speed value; at the same time, the two second signal indicators in the middle of the time display window will start to flash.
, the time display starts timing
.

Press the temperature control start/stop button again, the running status indicator will be off, the rotating lever will stop, and the speed will show 000; the second signal indicator will stop flashing, and the timing will also stop
.

Press the temperature control start/stop button of the melting instrument once, the temperature control status indicator above it is on, the water pump starts, and after a few seconds, the water in the water bath begins to circulate (if it does not circulate, try to remove the air or other obstacles in the pump): After two minutes, the heater is turned on and the water temperature begins to rise
.

Press the temperature control start/stop button once, the temperature control status indicator will be off, the heater will be turned off, and the water temperature will stop rising.
After two minutes, the water pump will be turned off and the water bath will stop circulating
.

Turn off the power switch of the fusion instrument, all display windows and indicators are not displayed
.

If the above operations and corresponding operating conditions are correct, the instrument device is qualified and can be put into use
.

The main features of the fusion instrument: 1.
The fusion instrument has three cups and three channels, and the three channels are synchronized and turned manually
.

2.
The fusion instrument has a transparent sleeve and a stainless steel mesh frame, and the flipping organization is novel and flexible
.

　　3.
The mesh frame of the melting instrument is made of imported stainless steel
.

　　4.
Active temperature control, high temperature control accuracy
.

　　5.
The magnetic water pump circulating water flow uniform heating system is selected, and the temperature of the water bath is uniform
.

　　6.
Fully active and intelligent control of temperature and time parameters
.

　　7.
The fusion instrument can preset time parameters at will; display preset value and real-time value in time division
.

　　8.
Active, active detection, active diagnosis, active alarm
.

　　9.
Active temperature control, active timekeeping, punctual turn over indication, and fault alarm
.

　　For more information about the fusion instrument, you can pay attention to our website.
If there is anything else you want to know, you can leave a message to the editor and tell the editor.
The editor has sorted out the content and will meet you in the next news!