How to choose the right powder filling machine?

First, the powder filling machine model selection regulations (1) First, we should determine the goods to be filled
.

(2) Cost-effective is the standard
.

(3) Pick a packaging factory with a long history as much as possible and ensure its quality
.

(4) If you are planning to browse the factory, try to pay more attention to all the machines, especially the key points of
the machines.

The quality of the machine is always at the key point
.

It is the application of real sample products for machine testing
.

(5) At the level of after-sales maintenance services, especially for food production companies, it is necessary to have an excellent reputation
.

You have to pick a high-quality after-sales repair service machine factory
.

(6) It is proposed to carry out some scientific research
on fully automatic packaging machines applied in other factories.

(7) As far as possible to choose the actual operation and maintenance is simple, spare parts are complete, with continuous automatic dosing device machine, can improve the packaging rate, reduce the company's long-term development trend of labor costs
.

The usual maintenance process of the fully automatic filling machine is specified to include the safety protection process
of machine cleaning, tightening, adjustment, wetting and erosion.

In the usual production and manufacturing process, the actual operation staff of machine maintenance should pay attention to the following machine maintenance guidelines and requirements, and solve a variety of maintenance daily tasks according to the maintenance cycle time to reduce the wear of accessories, prevent common failures and increase their service life
.

The maintenance process includes regular maintenance, on-time maintenance and maintenance On-time maintenance includes one, two and three levels, and maintenance includes periodic maintenance and termination maintenance
.

Second, maintain the standardized procedures and processes (1) according to the usual maintenance to carry out the solution
.

The key process is to moisten, tighten and test the parts concerned and their cleaning process
.

(2) The key is closely centered on testing and regulation
.

In general, it tests motors, clutches, transmissions, drive components, transfer and braking system components
.

(3) The key is focused on testing, regulating and preventing common faults and equalization that are likely to occur, as well as the level
of damage to each of its parts.

Such parts are likely to result in application standards, and the most likely machine failures should be checked and standard tests carried out to carry out the necessary dismantling, conditioning and possible prevention of common failure processes
.

Third, the important maintenance parts (1) power unit (motor) (2) transportation system software (extruder screw, belt conveyor) (3) air pressure system (the application of air compressor test moisturization and sealing) (4) automatic control system (maintenance of the electronic control cabinet, this part should be solved under the specific guidance of the technical engineer)