-
Categories
-
Pharmaceutical Intermediates
-
Active Pharmaceutical Ingredients
-
Food Additives
- Industrial Coatings
- Agrochemicals
- Dyes and Pigments
- Surfactant
- Flavors and Fragrances
- Chemical Reagents
- Catalyst and Auxiliary
- Natural Products
- Inorganic Chemistry
-
Organic Chemistry
-
Biochemical Engineering
- Analytical Chemistry
-
Cosmetic Ingredient
- Water Treatment Chemical
-
Pharmaceutical Intermediates
Promotion
ECHEMI Mall
Wholesale
Weekly Price
Exhibition
News
-
Trade Service
After the construction of some real stone paint projects, there will be an embarrassing situation where there are two faces on one wall.
The color of the coating is not uniform, and there are dark and light.
To solve the problem of color difference of real stone paint, it is necessary to start with the cause of the color difference:
Reason one
The use of poor quality tools in the painting of real stone paint is likely to cause chromatic aberration, and poor coating tools will cause uneven painting, uneven thickness, and ultimately chromatic aberration.
solution
Use high-quality coating tools to avoid uneven and uneven com" href="http://">coating thickness .
com" href="http://">Online coatingol.
com .
Reason two
Since real stone paint generally uses natural colored sand, it is affected by the objective factors of natural raw materials.
In the production process of real stone paint, slight color difference between different batches is easy to appear.
solution
In the same building, try to get enough products at one time; if it needs to be supplied in batches at different times, consult with the manufacturer to prepare the colored sand materials to reduce the color difference in the raw materials link.
Reason three
Of course, the same batch of real stone paint painted on the wall will also cause chromatic aberration due to not even mixing, inconsistent dilution, and different construction methods.
solution
1.
It is recommended to construct the same batch of materials with the same group of people on the same wall.
The overall wall surface should be completed in one go from top to bottom to avoid new and old colors caused by intermittent construction.
The flat effect and the rough surface effect will produce sensory differences.
Pay attention to the color difference of certain colors in backlight and normal light, direct sunlight and refracted conditions.
2.
Repair chromatic aberration: After constructing a wall, try to keep a few barrels of the same batch of products in order to repair the defective wall in the finishing stage of the project, and avoid the chromatic aberration caused by the finishing repair.
3.
Choose a professional team with rich construction experience.
