Hot air cycle oven a few maintenance precautions, hurry horse live

　　Pharmaceutical Network Technical Article: Hot air cycle oven is a common equipment in the pharmaceutical industry, in the process of use and maintenance, must follow the relevant principles, grasp the relevant precautions, in order to ensure the stable operation of equipment, to ensure the smooth operation of the entire drying production process
In the process of operating equipment, it is important to note that in the use of electricity, operators should not touch the left side of the box space of the electrical part, or with a damp cloth wipe and rinse with water; The use of this equipment should be responsible for a person, equipment use should be cut off external power, exempt from accidents and so on
Maintenance and maintenance of equipment is an important condition for extending the life of equipment It is understood that in the past, many people do not pay attention to the maintenance of hot air cycle oven, in a brutal production state, lack of maintenance equipment plans
"Are broken equipment to think of repair, usually there is nothing to maintain" "basically do not pay attention to preventive maintenance of equipment" "reluctant to buy good equipment, almost all after the repair" "a big money" .. Such cases are common In recent years, with the increase of the cost pressure of pharmaceutical companies, the maintenance and maintenance of equipment has also begun to pay more attention
At present, due to the lack of training of many domestic maintenance personnel and operators, as well as limited professional and technical capacity, the maintenance and maintenance of equipment standards are low Therefore, pharmaceutical companies need to strengthen the intensity of training and professionalism, improve the level of maintenance equipment, in order to keep the equipment running for a longer period of time
Operation and maintenance personnel to go through professional safety technical training, master the basic structure of the box and operating guidelines, learn maintenance knowledge Factory technical personnel said that the maintenance of hot air cycle ovenalso also need to pay attention to the following major matters
First, the equipment should be placed in a well-ventilated and light-free environment, do not fully contact the wall, do not place other items around
Second, the initial use of the equipment may be due to the rust coating heat and other reasons to produce light smoke and odor, after use twice will return to normal, this does not affect the use, can slightly open the window ventilation
Third, the box power outlet should be in line with the voltage set and reliably grounded to ensure safe use
Fourth, if the opening of the box door replacement or put into the item for a long time, should lower the temperature set straight or closed power switch 5 to 10 minutes or so to reduce the production of temperature punch phenomenon, to avoid unnecessary losses
Fifth, in order to maintain the beauty of the equipment, do not use acids or alkalis and other corrosive items to wipe the appearance, the box can be used dry cloth timed wipe clear
Sixth, when the temperature is higher, we should pay attention to the temperature of the box to prevent burns
Seven, do not put inflammable and explosive items
Eight, after the equipment used up, pay attention to turn off the power switch
Nine, the device control box is equipped with fuses, if the device does not power, should first check whether there is a problem with the fuse tube, in the view and replacement of the fuse pipe need to cut off the power supply, and replace the same model of standard fuse tube
In general, the maintenance of hot air cycle oven seems simple, in practice also need operators to master the relevant skills, in order to achieve the expected maintenance effect, to ensure the stable operation of production.