Food Packaging Migration Test Cell - Recommended

Food Packaging Migration Test Cell - Recommended migration test cell produced by Jinan Sanquan Zhongshi Experimental Instrument is suitable for the migration test pretreatment
of food contact materials and products.

Meet the requirements of the national standard GB 5009.
156-2016, and apply to all non-volatile food simulants in GB 31604.
1-2015 "General Principles for Migration Test of Food Contact Materials and Products
".

The standard stipulates the general principles of the test method for the migration test of food contact materials and products, reagents and materials, equipment and utensils, sampling and sample preparation methods, specimen contact area, specimen contact area and food simulated substance volume ratio, specimen cleaning and special treatment, test methods, measurement requirements of migration amount and result expression requirements
.

GB 5009.
156-2016 standard is applicable to the migration test pretreatment
of food contact materials and products.

Test method: 1, diagonally loosen the screw-in connection, remove the top fixing plate
.

2.
Place the material sample on the fixed plate, and the surface to be measured faces the food simulator
.

3.
Place the positioner and the appropriate center ring
.

4.
Place the second material sample on the central ring, and the surface to be measured faces the food simulator
.

5.
Put the top fixing plate and the O-type sealing ring
.

6.
Tighten the stainless steel knurled flat head screws
in a diagonal manner.

7.
Make the migration pool upright
.

8.
Remove the sealing cap and insert the funnel
.

9.
Add food simulants
to the center ring.

10.
Cover the sealing cap and seal
it.

11.
Keep the migration tank in an upright direction and put it in
a drying box at the necessary temperature.

12.
Then, remove the migration pool from the drying tank (Warning: it's hot!).
), cool to room temperature and open carefully
.

Technical parameters Fixed plate: 140×140mm Test cell: Φ110mm Material: Food grade stainless steel Filling volume: 190ml Contact height: Approx.
20mm Test area: 95㎡ ×2 Size: 140×140×60mm Weight: 2.
6kg Food packaging migration test cell - recommended