Do you know how to use a water-tight thermostatic incubator

The water-repellent incubator is a constant temperature equipment, which can be used for plant tissue, germination, cultivation of seedlings, cultivation of microorganisms, feeding of insects and small animals, BOD determination of water quality testing, and other purposes of constant temperature testing
.

It is the equipment
of biological genetic engineering, agriculture, forestry, environmental science, animal husbandry, aquatic products and other production, scientific research and education departments.

Isolated incubator shape is vertical, the box and the outer box door is made of steel plate, the surface is painted, the inner door is tempered glass, without opening the inner door can clearly observe the culture items in the box, the studio is made of SUS304 mirror stainless steel welding, and the movable shelf can arbitrarily change the height of
the shelf.

A silicone rubber seal is installed between the studio and the tempered glass inner door to ensure that the inner door and the studio are sealed
.

The left, right and bottom insulation sleeves outside the outer wall are heated, and a low-noise small fan is installed in the work room, equipped with a reasonable air duct structure to ensure the uniformity of
the temperature in the box.

The temperature control part adopts a new type of intelligent digital display temperature regulator with single-chip microcomputer technology, double-row digital tube or liquid crystal display
.

Among them, the LCD upgraded incubator is equipped with RS-485 as standard, which can be connected to a computer and real-time monitoring of working status
.

The temperature is adaptive temperature control, no temperature control parameter adjustment is required, and the control accuracy is high
.

According to different requirements, the user can set and adjust the temperature and time through the touch key of the operation panel to achieve the purpose of
the test.

How to use the water-proof thermostatic incubator First from the water inlet (below the side plate) to inject water into the stainless steel inner tank, the water level height to the overflow port (above) water outlet, close the lower inlet, and then turn on the power supply, turn on the power switch, set the required temperature (the thermostat instruction manual is attached), put the items that need to be cultivated into the work room after the temperature is constant, close the studio door, and start the experiment
.