-
Categories
-
Pharmaceutical Intermediates
-
Active Pharmaceutical Ingredients
-
Food Additives
- Industrial Coatings
- Agrochemicals
- Dyes and Pigments
- Surfactant
- Flavors and Fragrances
- Chemical Reagents
- Catalyst and Auxiliary
- Natural Products
- Inorganic Chemistry
-
Organic Chemistry
-
Biochemical Engineering
- Analytical Chemistry
-
Cosmetic Ingredient
- Water Treatment Chemical
-
Pharmaceutical Intermediates
Promotion
ECHEMI Mall
Wholesale
Weekly Price
Exhibition
News
-
Trade Service
Do you know all the maintenance points for low temperature incubators? The good usage habits and maintenance of the low-temperature incubator have a great impact on the life of the equipment and the measurement results.
Here is an introduction to the daily maintenance of the low-temperature incubator: 1.
Before the operation of the low-temperature incubator, the internal impurities in the laboratory must be cleaned.
The laboratory should be cleaned at least once a year; 2.
The ground around the body and the bottom of the low-temperature incubator should be kept clean; 3.
When the test product time arrives to take the product, the product should be taken and placed in the off state
.
4.
When opening and closing the door of the low-temperature incubator or taking the test object from the box, do not let the object contact the door seal , All functional joints and welding ports, if there is oil leakage, deal with it immediately; 6.
After each test, it is recommended to clean the test box with clean water to keep the equipment clean; The box is dry; 7.
The condenser should be regularly maintained and kept clean
.
Dust sticky condenser will cause the high pressure switch of the compressor to trip and cause false alarm.
The condenser should be maintained once a month.
Use a vacuum cleaner to absorb the dust on the cooling mesh of the condenser.
After starting the machine, use a hard brush or high pressure Blow off the dust from the air nozzle; 8.
The circuit breaker provides the safety protection of the test product of the machine and the operator, please check it regularly
.
The above is the relevant introduction about the maintenance points of the low temperature incubator.
I believe that everyone has a corresponding understanding of this after reading it.
You can use it as a reference and hope it will be helpful to you
.
Here is an introduction to the daily maintenance of the low-temperature incubator: 1.
Before the operation of the low-temperature incubator, the internal impurities in the laboratory must be cleaned.
The laboratory should be cleaned at least once a year; 2.
The ground around the body and the bottom of the low-temperature incubator should be kept clean; 3.
When the test product time arrives to take the product, the product should be taken and placed in the off state
.
4.
When opening and closing the door of the low-temperature incubator or taking the test object from the box, do not let the object contact the door seal , All functional joints and welding ports, if there is oil leakage, deal with it immediately; 6.
After each test, it is recommended to clean the test box with clean water to keep the equipment clean; The box is dry; 7.
The condenser should be regularly maintained and kept clean
.
Dust sticky condenser will cause the high pressure switch of the compressor to trip and cause false alarm.
The condenser should be maintained once a month.
Use a vacuum cleaner to absorb the dust on the cooling mesh of the condenser.
After starting the machine, use a hard brush or high pressure Blow off the dust from the air nozzle; 8.
The circuit breaker provides the safety protection of the test product of the machine and the operator, please check it regularly
.
The above is the relevant introduction about the maintenance points of the low temperature incubator.
I believe that everyone has a corresponding understanding of this after reading it.
You can use it as a reference and hope it will be helpful to you
.
