Distilled water insulation tanks are storage tanks made of stainless steel

Distilled water insulation tanks are storage tanks
made of stainless steel.

Compared with ordinary rotomolding storage tanks, stainless steel storage tanks can withstand higher pressures and are widely used in many high-pressure occasions, while stainless steel storage tanks have obvious characteristics: the tank has excellent sealing performance, eliminating the invasion of harmful substances and mosquitoes in the air, ensuring that the liquid stored in the tank will not be polluted by the outside world and will not breed red worms, so stainless steel storage tanks are mostly used to store and transport food, medicine, and are widely used in the winemaking industry and dairy industry
.

Its thermal insulation performance is good, plus safe and reliable, low cost of insulation pipes
.

It effectively solves the high temperature heat transmission of 130 °C-600 °C in urban central heating
.

Direct buried insulation pipe not only has advanced technology and practical performance that are difficult to compare with traditional trench and overhead laying pipes, but also has significant social and economic benefits, and is also a powerful measure
for heating and energy saving.

Precautions for distilled water insulation storage tanks: (1) The shell must be well grounded to avoid danger
.

(2) Before each use, the inside of the pot should be washed once, drained of stored water, and replaced with new water
.

Be careful not to damage the tin layer
on the surface.

(3) If possible, the water source will be changed to deionized water instead of tap water
.

(4) The pot can be heated after adding enough water, the water source cannot be interrupted during the work process, the liquid level should always be maintained at the water level, if there is no water in the pot or the amount of water is very small, the electric heating pipe will burn out
.

(5) When replacing the electric heating pipe, the gasket at the water connection must be lined to ensure that the seal does not leak, otherwise the water droplets attached to the head of the electric heating pipe will cause the accident
of the insulation being broken.

The bolt connection between the wire and the electric heating pipe should be pressed tightly, otherwise the contact resistance is too large and the heating is serious, and it may also produce an electric spark to burn the head
of the electric heating pipe.

(6) Regularly remove the scale in the inner wall of the evaporation pot, the surface of the electric heating pipe, the inner wall of the condenser, the surface of the condenser tube and the condenser outlet pipe to avoid affecting the condensation effect, reduce the thermal efficiency and block the pipeline, and reduce the service life
.

The exchange of steam for hot and cold is currently a reliable method for extracting
distilled water.

By heating distilled water to produce steam, condensed into distilled water, can be applied to pharmaceutical, preparation, laboratory, laboratory and other departments.