Details to pay attention to when using the capping machine daily

Shanghai Shenggang automatic capping machine adopts disc positioning type automatic capping, magnetic torque capping or capping, adopts frequency conversion control, the speed of the main engine can be adjusted, and the capping speed can be adjusted arbitrarily according to the actual output
.

The fully automatic capping machine has reasonable design, compact structure, no damage to the cap by capping, high efficiency, stability and reliability, and long service life.
Vacuum devices can be added according to customer needs.
The equipment is made of 304 stainless steel, which fully meets the requirements of the new version of GMP and is widely used.
in pharmaceutical, food and chemical industries
.

1.
When using the capping machine on a daily basis, you should pay attention to whether the operating environment meets the equipment.
Different capping devices often have their own instructions.
For example, the operating temperature needs to be controlled below forty degrees Celsius and minus five degrees above zero, and The humidity should not be too high, otherwise it is easy to corrode the equipment or cause a short circuit, and the equipment should be used and stored in a ventilated and dry place
.

 2.
Before each operation of the capping machine, an overall inspection of the equipment should be made to check whether there is poor contact or whether the power supply voltage is stable, etc.
, and the operation content should be reasonably arranged during the operation.
The most important thing to avoid is the short-term Frequent adjustment of the rotation direction can easily damage the motor
.

When screwing the cap, the operation should be standardized.
For example, some equipments use too much force each time the cover is pressed, resulting in unstable capping over time.
Therefore, the operation must be standardized
.

3.
It should also be noted that the capping machine with the computer as the operating terminal starts to shut down from the computer operating system when it is shut down, and also looks at the computer operating system when it is turned on.
This is to prevent the occurrence of unfinished instructions in the computer.
It is executed automatically after booting, so make sure that the control system is shut down and turned on normally
.

 What I just mentioned is the things that should be paid attention to when using the capping machine.
These operations are details but related to the operation of the equipment.
Therefore, it is recommended to be proficient in the instructions and operating specifications of the equipment first, and the operator must be skilled enough in the operating system.
Only in this way can the equipment be operated reasonably according to the job content, so that the capping machine can run smoothly for a long time.

.