-
Categories
-
Pharmaceutical Intermediates
-
Active Pharmaceutical Ingredients
-
Food Additives
- Industrial Coatings
- Agrochemicals
- Dyes and Pigments
- Surfactant
- Flavors and Fragrances
- Chemical Reagents
- Catalyst and Auxiliary
- Natural Products
- Inorganic Chemistry
-
Organic Chemistry
-
Biochemical Engineering
- Analytical Chemistry
-
Cosmetic Ingredient
- Water Treatment Chemical
-
Pharmaceutical Intermediates
Promotion
ECHEMI Mall
Wholesale
Weekly Price
Exhibition
News
-
Trade Service
1.
Before each drive, you must use the crank handle to turn the machine to see if there is any abnormality in its rotation.
After it is confirmed that it is normal, you can drive
.
But please note: Before driving, be sure to pull out the crank handle to disengage the handle from the machine
.
Ensure safe operation
.
2.
When adjusting the machine, the tools should be used properly.
It is strictly forbidden to use too large tools or excessive force to disassemble the parts, so as to avoid damaging the parts or affecting the performance of the machine
.
3.
Whenever the machine is adjusted, be sure to tighten the screws, turn the machine, and check whether the action meets the requirements before driving
.
4.
The size of the gas head should always be judged whether it is good or not, because the small holes of the gas head are easily blocked by carbon deposits or the small holes are deformed after a certain period of use, which affects the firepower
.
5.
An exhaust pipe should be installed on the fire head of the potting machine, which can remove heat and a small amount of dust in the gas, and at the same time maintain the indoor temperature, humidity and cleanliness, which is good for the product quality and the health of the staff
.
6.
The machine must be kept clean, and oil stains, liquid medicine or broken glass on the machine are strictly prohibited, so as to avoid machine damage.
