Concealed anti-theft latex paint formula

Introduction

• The thermal imaging is clear, highly sensitive, not affected by the environment (such as electromagnetic radiation, nuclear radiation, etc.
  ), and has good vibration resistance.
  It can maintain good performance under climatic conditions such as fog, rain, and snow.
  
• Thermal imaging has good concealment and prevention.
  There is no image display in the visible light range.
  It complements the existing anti-theft technology.
  It can be directly brushed or sprayed on the wall like ordinary latex paint.
  It can be used in key anti-theft areas on the curve perimeter.
  
• It has the characteristics of convenient construction, low cost, long-term anti-theft, etc.
  , does not require any maintenance costs, and does not require any power equipment.
  

Application field

• Concealed anti-theft latex paint is mainly used on building walls.
  

Recipe details

Production Method

• Put deionized water into the reaction kettle, add cellulose and disperse for 5-30 minutes at a speed of 300~500r/min;
• Put in dispersant, wetting agent and defoamer at 800~1200r/min speed, and disperse for 10~30min;
• At the speed of 1000~1500r/min, put in black silicon wafer powder, pigments and fillers, and disperse for 10~60min;
• At 300~800r/min rotating speed, put in preservative, defoamer, acrylic emulsion, pH adjuster, thickener, disperse evenly and filter to get the finished product.
  

Precautions

• The proportions of each component by mass range are: deionized water 25~35, cellulose 0.
  15~0.
  2, dispersant 0.
  5~1, wetting agent 0.
  05~0.
  08, defoamer 0.
  1~0.
  2, black silicon wafer powder 10 ~20, pigment and filler 15~25, preservative 0.
  1~0.
  2, defoaming agent 0.
  18~0.
  22, acrylic emulsion 30~35, pH regulator 0.
  05~0.
  1, thickener 0.
  5~0.
  8.