Coating process: Test Method for adhesion of waterborne nano UV coating
-
Last Update: 2020-04-03
-
Source: Internet
-
Author: User
Search more information of high quality chemicals, good prices and reliable suppliers, visit
www.echemi.com
Core tip: the adhesion test of water-based nano UV coating is one of the important test items to check the anti falling and deformation of the coating under the complex and humid environment Here is the whole process of the test: 1、 Test environment and equipment: Baige knife, 3M adhesive paper (No 600) base material: Marble 2、 Test process: 1 Draw 10x10 (100) small grids on the surface of the test sample with a hundred grid knife 2 Clean the broken paint in the test area with a brush Which is the price of Dajin diatom mud Recommended brief introduction: which is the price of Dajin diatom mud? How to buy genuine diatom mud? Guangdong diatom mud agent suggests placing a basin of cold water in the air conditioning room, so that the diatom mud wall can breathe effectively The feature of the breathing wall is obvious When the indoor air is dry, the diatom mud wall will release the absorbed water quickly Put it out to help regulate the indoor dry humidity It is suggested to place a basin of cold water in the air conditioning room, so that the wall of diatom mud can breathe effectively The feature of the wall that can breathe is obvious When the indoor air is relatively dry, the wall of diatom mud will absorb the water Coating home news: the adhesion test of water-based nano UV coating is one of the important test items to inspect the coating's anti falling and deformation under the complex and humid environment Let's explain the whole process of the test as follows: 1 Test environment and equipment: bagel knife, 3M rubber paper (No 600) substrate: Marble 2 Test process: 1 Use bagel knife to mark 10 on the surface of the test sample X10 (100) small grid 2 Clean the broken paint in the test area with a brush 3 Firmly stick the small grid to be tested with 3 tape, and wipe the tape with eraser 4 Grasp one end of the tape by hand, and quickly pull off the adhesive tape in the vertical direction (90 degrees), and carry out the same experiment for three times at the same position 3、 The test results are as follows: 1 The edge of 100 grid marking is smooth, and there is no paint falling off at the marking edge and intersection after 3 times of vertical drawing with 3M adhesive paper 2 It is determined that 5B pass coating home is focused on the news and information of coating, diatom mud, paint coating, coating process, fire retardant coating and coating, diatom mud, paint coating, coating process, decoration knowledge and decoration effect map of fire retardant coating,
This article is an English version of an article which is originally in the Chinese language on echemi.com and is provided for information purposes only.
This website makes no representation or warranty of any kind, either expressed or implied, as to the accuracy, completeness ownership or reliability of
the article or any translations thereof. If you have any concerns or complaints relating to the article, please send an email, providing a detailed
description of the concern or complaint, to
service@echemi.com. A staff member will contact you within 5 working days. Once verified, infringing content
will be removed immediately.