Cangzhou Refining and Chemical Hydrogen Production Reforming Furnace Completed Material Upgrade

Recently, with the 102nd furnace tube hoisted in place and qualified by welding, the Cangzhou Refining & Chemical Hydrogen Conversion Furnace Material Upgrading Project was successfully completed

The original hydrogen production reformer of Cangzhou Refining & Chemical Co.

In actual operation, due to long-term high temperature service, the welding seam between the reinforced joint on the top of the furnace tube and the upper tail tube has experienced different degrees of stress relaxation and cracking, which has a certain impact on the safe and stable operation

In response to this problem, Cangzhou Refining & Chemical has repeatedly invited experts in the system to conduct discussions and research, and went to sister companies for investigation

After the material is upgraded, the furnace tube reinforced pipe joint and the upper tail pipe are of the same material, so the welding performance is better, the reliability is higher, and the welding residual stress is prevented

In addition, due to increasingly stringent environmental protection requirements, the original hydrogen conversion furnace burners can no longer meet the environmental protection requirements of normal production.

Since the entire construction is only 22 days, the time is tight, the tasks are heavy, and the construction is difficult, Cangzhou Refining & Chemical has communicated and coordinated with the manufacturer many times to transport the materials to the construction site in advance for acceptance

During the entire construction process, Cangzhou Refining & Chemical Corporation strictly controlled construction safety and quality.

　　In order to ensure the quality of welding, they conducted strict inspections and supervision of the whole process around whether the welding materials were correct, whether the welding current was up to standard, and whether the wind speed and temperature were appropriate

　　Due to strict quality control, after flaw detection, 206 main welds, the first pass rate reached 100%

　　(Zhang Yuanwang)