Battery film puncture strength tester Weight: approx. 20 kg Shanghai Huitao

Battery film puncture strength tester diaphragm puncture strength tester adopts automatic clamping device, fully automatic completion of the test, the test data is fine Z stable, good
repeatability.

It is suitable for measuring the puncture resistance of battery separators, films, composite films for packaging, bags, etc.
to resist penetration by puncture needles (puncture resistance, puncture strength or puncture elongation indicator) Working mode: puncture resistance: Z force
required when the puncture needle penetrates vertically.

Puncture Strength: Test the puncture resistance
of the thickness.

Puncture elongation: After the needle touches the specimen, it starts when the force value reaches the pre-pressure and reaches the position distance of
the puncture needle when the specimen penetrates.

Test method: put the specimen with a diameter of 100mm on the fixture, press the test key instrument to automatically clamp the specimen, and then use a steel pin with a diameter of 1.
0mm and a radius of 0.
5mm at the top of the spherical tip to overshoot at a speed of (50 mm / min or (100 mm / min), and read the Z load
of the steel needle penetrating the test piece.

The instrument automatically calculates the puncture strength
.

Note: The number of test pieces is more than 5, take the technical average
.

Executive standard: GBT 37841-2019 Plastic film and sheet puncture resistance test method GB/T36363-2018Polyolefin separator for lithium-ion batteries GB/T21302-2007 Composite film for packaging, bag general rules Technical parameters: Measuring range: (0-50) N resolution: 0.
01 N accuracy: ±0.
5% (0.
5 level) load sensor: resolution of 0.
01 N; Puncture needle: φ = 1.
0mm, tip D is spherical R = 0.
5 mm; Test speed: (100 Shi 10) mm / min or (50 Shi 5) mm / min (optional) sample fixing fixture: inner diameter of (10 Shi 0.
1 ) mm or (50 Shi 0.
5) mm (optional) Effective Stroke: 1200mm Power supply: AC 220V±22V, 50Hz Dimensions: 600×500×1500mm Weight: about 20 kg Product Features: 1, High precision using a high-precision load cell, to ensure that the test accuracy error is within ±0.
5%.

。
2.
Good repeatability is controlled by stepper motor, the probe travel process is fine Z and stable, and the measurement results are repeatable
.

3.
Easy to use, easy to operate LCD Chinese display, friendly man-machine interface operation
.

The use of automatic clamping device, fully automatic completion of the test, with test data statistical processing function, micro printer output, can also be connected to the computer operation
.

When connected to a computer, in addition to automatically remembering and storing the results, the burst resistance curve can also be displayed and saved
.

4.
It is convenient for measuring and calibrating instruments with special calibration weights and built-in calibration procedures, which is convenient for the metering and calibration departments (third parties) to calibrate
the instrument.

Product use: This machine can be used to test the battery separator material tensile, puncture, tearing and other experiments, for quality control, feed inspection, physical properties test, mechanical research, material development of the basic equipment
.

Application areas: film self-adhesive tape, automotive, ceramics, composite materials, construction, food medical equipment, metal, paper, packaging, rubber, textiles, wood, communications and various special-shaped materials This machine meets the battery separator various standards of tensile puncture, customized different puncture fixtures
according to different standards.

Executive standard: GB/T36363-2018 DB44T1152-2013BBT 0024-2018 BB/T0024-2004 Safety device: 1.
Stroke protection: set to the upper and lower limit protection at the beginning to prevent exceeding the preset stroke; 2.
Force protection: The system can set the Z force value to prevent exceeding the calibration value
of the sensor.