Automatic Moisture Collection Station - A soil wireless moisture monitoring station @2022 has been updated

Automatic moisture collection station - a soil wireless moisture monitoring station @2022 has been updated Automatische Sammelstation für FeuchtigkeitFT-TS400 soil as an important basic condition of agriculture, is crucial for the acquisition of soil-related information, and the purpose of using the soil moisture monitoring station is to manage and analyze the soil, so as to provide a large amount of data
for agricultural scientists and technicians to grasp soil information.

I.
Product Introduction FT-TS400 soil moisture monitoring station is a highly integrated, low-power, quick installation, easy to use in the field monitoring of high-precision automatic meteorological observation equipment
.

The device supports wired, GPRS, Bluetooth and other transmission methods, free of debugging, can be quickly arranged, widely used in agriculture, forestry, geology, universities, scientific research and other aspects
.

Mainly for soil moisture content and soil temperature monitoring, through moisture sensors and temperature sensors to measure the volume moisture content (VWC) and temperature values
of soil.

At the same time, according to the needs of users, the configuration of soil conductivity, soil PH, air temperature, air humidity, solar radiation, rainfall and other meteorological sensors
can be expanded.

Second, product features 1, four-layer soil temperature and humidity sensor 2, solar panel top cover mosaic design, improve the photoelectric conversion efficiency, increased wind resistance grade 3, low temperature 7 inch Android screen, version: 4.
4.
2, quad-core Cortex-A7™, 512M/4G 4, charge controller: MPPT automatic power point tracking, efficiency increased by 20% 5, SMS alarm, send SMS on the mobile phone after the limit 6, soil moisture temperature integration, stainless steel made of steel needle, Can withstand long-term point solution, more corrosion resistant 7, ABS material protective box, corrosion resistance, oxidation resistance, waterproof grade IP66 three, technical parameters 1) soil moisture: measuring range: 0-100%, accuracy: ±3%, probe length: 5.
5cm, probe diameter: 3mm, probe material: stainless steel 2) soil temperature: temperature measurement range -40 + 125 °C, measurement accuracy ±0.
5 °C, resolution: 0.
1 °C 3) soil conductivity: measuring range Optional range: 0-5000us/cm, 10000us/cm, 20000us/cm, measurement accuracy of 0-10000us/cm range, ±3%; 10000-20000us/cm range is ±5%, resolution 0-10000us/cm within 10us/cm, 100000-20000us/cm within 50us/cm (optional) 4) Soil PH: Measuring range: 0-14 Resolution: 0.
1 Measurement accuracy: ±0.
2% (optional) 5) Air temperature: Measuring principle diode junction voltage method, -40°C ~ 85°C (±0.
3°C) (optional) 6) Air humidity: measuring principle capacitive type ,0~100%RH(±2%RH) (optional) 7) Solar radiation: measuring principle photoelectric effect, 0-2000W/m2(0.
1W/m2)(optional) 8) Optical rainfall: Measuring principle Photoelectric type, 0~4mm/min (optional) 9) Data storage: not less than 500,000; 10 deployment time: 1 person, not more than 30 minutes to complete the layout; 11) The production enterprise has ISO quality management system, environmental management system and occupational health management system certification 12) The production enterprise has the intellectual property management system certification certificate and the soil moisture software registration certificate 13) The production enterprise is a 3A credit enterprise