Anti-high temperature steam corrosion anti-corrosion anti-corrosion coating is best protected

China Coatings Network
: ZS-1061 high temperature infrared radiation
coating
is a new type of material using the molecular and atomic properties of special materials. With this infrared radiation coating and heating parts, infrared radiation heating device can be designed and manufactured. The ZS-1061 infrared radiation coating is applied to the refracessive material of the inner wall of various heating equipment, which becomes a heating device with infrared radiation characteristics. ZS-1061 infrared radiation heating device and infrared radiation heating equipment have been confirmed by production practice, with obvious energy-saving effect.
located in Fengtai District East Railway Camp, Beijing Zhisheng Weihua Chemical Co., Ltd. developed and produced ZS-1061 high temperature far infrared radiation coating, high radiation coefficient, inorance water, the use of Chisheng Weihua special high temperature solution, temperature resistance can reach 18 00 degrees C, not only with a variety of refrater-resistant materials bonded firmly and a variety of metal materials are also bonded firmly, with fast heating, shorten the heating time, reduce oxidation burn loss, anti-corrosion wear, reduce smoke, extend furnace age, easy to use, simple safety, non-polluting and so on. The effect of increasing production, energy saving and emission reduction is very significant, it is a practical new energy-saving material, and the technical indicators reach the international advanced level.
brush coating ZS-1061 high temperature far infrared radiation paint high temperature furnace heating faster, furnace heating and cooling speed has been greatly improved, before spraying the maximum heating speed and cooling speed of about 3 degrees C/min, the maximum heating speed after spraying And cooling speed of about 5 degrees C / min or more, heating speed, furnace refrater material heat storage small heat resistance high temperature far infrared coating is mainly used in high temperature furnaces, infrared discovery and development of development and high temperature far infrared, coatings used in industrial furnaces The temperature of the furnace can be increased by 20 degrees C to 100 degrees C, the surface temperature of the furnace can be reduced by 5 degrees C to 20 degrees C, the refracing material crisping can be reduced by 20% to 80% in unit time, the smoke can be reduced by 45%, energy saving 3% To 30%, improve thermal efficiency 5% to 10%, extend the life of the furnace 1 to 3 times, Zhisheng Weihua ZS-1061 high temperature-resistant far-infrared radiation coating is to increase production, energy saving and emission reduction to extend the furnace age of effective high-temperature resistance materials. Because the size of the radiation energy is directly related to the 4 variances of absolute temperature, and the radiation can be transmitted outwards in the form of far infrared waves, when the far infrared wave radiation to the heated object is absorbed by the heated object, these far-infrared wave penetration capacity is very strong, can penetrate the heated object layer, so that the surface of the heated object at the same time conduct heat. This makes the heating time shortened, the heat is uniform, oxidation burn loss is reduced, greatly improve the energy combustion rate, improve the economic benefits of enterprises.