Analysis of the use and application of high and low temperature control systems

High and low temperature temperature control system can be heated by different media, the equipment is stable in operation, simple operation, suitable for the pharmaceutical and chemical industries to connect the reaction device for refrigeration, heating, the reactor for heating or constant temperature control
.

1.
Before using the high and low temperature control system, you should read the equipment manual in detail, be familiar with the operation process and key instructions, and operate
in strict accordance with the conditions specified in the manual.

2.
When moving the high and low temperature control system, avoid hitting the equipment shell, vibrating and damaging or polluting the key area (function key display).


3.
Before the high and low temperature control system is used, ensure that the equipment is regularly checked (at least once every two years) whether it is in normal working condition
.

4.
When storing, it should be in a clean environment with enough fresh air to prevent pollution
.

There is a space of more than 30 cm around, and the ground is flat and strong
.

Make sure the input power supply is properly grounded
when in use.

5.
Pay attention to whether the upper and lower temperature limits, ignition point, viscosity, freezing point, etc.
of the thermal conductive medium of the high and low temperature control system meet the requirements, and whether it is suitable for the use of internal pipelines of the
instrument.

Unsuitable thermal media will have a negative impact on the instrument and equipment, and may cause damage
to the device.

Therefore, only the thermal medium specified by the manufacturer can be used and used within the specified pressure range
.

6.
The high and low temperature control system regularly checks the optic mirror on the side of the equipment to confirm whether the liquid level of the thermal conductive medium is in a normal position
.

Replace the thermal medium of the high and low temperature control system regularly
.

If different types of silicone oil are replaced, do not mix due to different oil characteristics, if the mixture is easy to produce sludge, resulting in blockage, it will not be able to clean
up when it is serious.