5 Factors Affecting the Price of a Walk-In Aging Home

The price of the walk-in aging room is determined by the accessories, but its performance and quality are determined by the software, so when purchasing, you should first pay attention to the software of the equipment, followed by the hardware, and then the after-sales service of the manufacturer.
We will introduce the factors that should be considered that affect the price of the walk-in aging room: 1.
The size of the room (the size of the room determines the fan selection, the number of fans, and the size of the air duct) 1.
The axial flow fan is installed on the top of the aging room, and installed on the ceiling according to the size of the fan.
The corresponding number of louver windows is installed, and the concept of the upper air outlet and the upper air return is adopted.
This method is inexpensive and the controllability of temperature uniformity is not high, because the heat is from bottom to top
.

2.
The air cabinet is mainly used in the aging room because the room is too large, the span is too wide, and the temperature uniformity requirements are too high.
If the room is very large, the number of centrifugal fans will be increased accordingly, and the noise will be very loud
.

This cost is very high
.

2.
Temperature range (different temperature ranges choose different materials) 1.
At present, the commonly used thermal insulation material for walk-in aging rooms on the market is high-density rigid polyurethane foam
.

The exterior is 304 stainless steel, its high temperature resistance is 85 degrees, good hardness, good quality, especially for large-scale aging rooms, this material must be used, and it is easy to disassemble and assemble, which is convenient for the relocation of aging rooms
.

But the price is relatively expensive, but generally professional companies will use it
.

2.
In addition, EPS color steel plate is mainly used for aging in the range of normal temperature to 60 degrees.
EPS color steel plate is commonly known as foam board, which is not flame retardant.
The problem is that the rock wool color steel plate is only used when the aging temperature is above 60 degrees
.

3.
Products that need to be aged and the power of the products: the difference of the products involves whether the products are hot or not, and the power involves the configuration of the power supply inside, which shows that the price of the walk-in aging room is directly related to the configuration
.

Fourth, temperature uniformity requirements: If the temperature uniformity requirements of the walk-in aging room are too high, the use of PLC to implement multi-point control or control by means of sub-master machines will also increase the corresponding cost
.

5.
The temperature point and the total power of the product that are often used for aging: it involves the exhaust system.
The exhaust air is constant at a certain temperature point according to the size of the room, the temperature range and the power of the product.
When the product heats too high, the exhaust fan runs.
Ensure that the temperature is controlled at the set temperature
.

  Therefore, everyone knows the truth of the price for the goods, so it is recommended that you compare the manufacturers with production and R&D strength when purchasing a walk-in aging room.
First, compare the quality of the equipment, such as software, hardware, etc.
, it is recommended It is a control software developed stably according to the actual situation of the equipment
.

The second is to compare the price of walk-in aging houses.
The price is reasonable and the quality of the equipment is really good equipment with high cost performance
.